Applied Materials (AMAT), the semiconductor capital equipment maker, reported worse than expected revenue and earnings for fiscal Q3 when it reported on August 15, 2012. Contrast my story about Applied's Q1, where I said results came in better than expected because "a couple of large foundries placed unexpected orders and took delivery faster than expected on Q4 orders. Most of this unexpected bonus was to fabricate mobile application processors, which are the hearts of tablet computers and smartphones."
What are investors to make of such quarterly fluctuations? Is AMAT in trouble, or is was Q3 just a small bump in the road?
Capital equipment of any kind can be very cyclical and sensitive to changes in ultimate product demand. If end-market demand is not increasing factories (in this case foundries) don't need to add more equipment to keep up with demand. In semiconductors this is somewhat mitigated by the constant shrinking of transistor sizes, but that also comes in cycles, with Intel typically doing the first shrink and everyone else catching up later depending on their specific product needs, usually new product introductions.
The numbers tell the overall story of Q3 (which ended July 29). Revenues were $2.34 billion, down 8% sequentially from $2.54 billion and down 17% from $2.79 billion in the year-earlier quarter. GAAP Net income was $218 million, down 25% sequentially from $289 million and down 54% from $476 million year-earlier. GAAP EPS (earnings per share) were $0.17, down 23% sequentially from $0.22 and down 53% from $0.36 year-earlier.
Note that profits were substantial even at this level of revenue. This may not be the very bottom of the current cycle, but it is probably pretty close.
Foundries were cautious ordering in the quarter, prefering to risk not being able to produce enough chips in Q4 if demand is greater than expected. The same seems to be true throughout the semiconductor industry lately, with everyone trying to keep inventories low in case demand in Europe or China sinks further.
Management reported that much of the equipment is being sold to manufacture chips for mobile devices, but as device sales are seasonal, semiconductor fab equipment sales are starting to show more annual seasonality than in the past. The industry is moving to 28 nm based mobile devices, so even without global demand expansion 28 nm capacity has to be added (at 28 nm smartphone makers can get more computing capacity while extending battery life).
Applied Materials is also suffering from its display equipment segment, as display factories have plenty of capacity. However, new technologies will likely be introduced in 2013. Similarly its solar equipment sales were minimal as factories in China are able to meet short term demand for solar cells. Prices have dropped enough that demand should gradually pick up the slack caused by overproduction, despite new U.S. punitive tariffs. In addition, there has been talk of Applied selling its solar division. That makes no sense to me, it would make more sense to at least hold onto it until demand returns, when it would fetch a considerably better price.
One strong point for Applied during demand dips is its services division. Old equipment needs maintenance. Services revenue was $579 million, up 5% in the quarter.
Of course if the global economy melts down even bonds and gold will be worthless, but the most likely scenario for Applied Materials is for stronger growth in late 2012 and into 2013. This will be driven by returning demand for display and solar manufacturing equipment, as well as the more complicated (and expensive) equipment lines needed to manufacturer semiconductor chips and 28 nm and below.
AMAT has a number of competitors, but loss of market share has not been an issue. Applied spent $209 million on research and development in the quarter and has a healthy pipeline of new and future products.
For more details about Q3 results, including questions by analysts, see my Applied Materials Q3 2012 Analyst Call notes.
If you are a long-term investor in Applied Materials you can still do what I do, taking advantage of the mistakes of short-termers. We know revenue of from sales of expensive pieces of capital equipment will be cyclic. In the long run the cycles don't matter to much, only the long-term trend and dividends. On down legs the stock tends to be underpriced, and at least in bull markets on the upward portion of cycles the stock may get overpriced. Buy low, sell high. There are always people doing the opposite who will be happy to trade with you.
AMAT stock ended yesterday at , giving it a market capitalization near $14.3 billion. Its 52 week low was $9.70 on October 4, 2011, and its 52 week high was $13.94 on February 17. It pays $0.09 per quarter in dividends, making its yield today 3.1%.
Disclaimer: I have a long position in Applied Materials (AMAT), with a long term view. I will not trade in AMAT for at least 7 days after this article is published.
See also the Applied Materials web site.
And keep diversified!
Showing posts with label solar cells. Show all posts
Showing posts with label solar cells. Show all posts
Tuesday, August 28, 2012
Wednesday, March 2, 2011
Applied Materials: Value, Growth, and Tablets
Applied Materials (AMAT), the semiconductor capital equipment maker, reported stronger than expected revenues and earnings for its first quarter of fiscal 2011 ending January 31, 2011. Revenue growth was up 45% year over year. Yet its PE (price/earnings) ratio is far lower than most technology stocks with similar growth records.
Trying to place a bet on tablet computers or smart phones? You can bet on the brands like Apple, Motorola, and Samsung. Or you can bet on the companies that supply the chips to make the tablets work, for instance, Qualcomm, TI, NVIDIA, Marvell and others. These are all pretty well known companies, but who really knows who consumers will be in love with in 2 years? Who knows whose chips two years from now will be winning the majority of slots in the new machines?
One thing you can pretty much count on: the constituent parts for tablet computers will be manufactured by someone. When it comes to actually making the silicon, Applied Materials is the dominant supplier of the necessary equipment.
In 2008 and 2009 Applied Materials had a rough time. No new capacity was needed; even shrinks (to smaller transistor sizes) were put off as long as possible. But because the company was well managed and had plenty of cash, it navigated successfully through the recession.
In 2010 Applied came roaring back as fabrication companies started making up for lost time.
Are people going to be satisfied with the computational or memory powers of 2010 style tablets and smart phones? No. The ARM processors are (so far) no match for the silicon from AMD or Intel that is available in a desktop or notebook computer. People may want portability, but they still want highly capable, fast machines. That means cramming more transistors onto chips, and using new technologies that keep voltage and power requirements down. In turn, to achieve that, the fabs need new machines capable of imprinting silicon with ever smaller patterns.
As reported in the Applied Materials February 24, 2011 analyst conference call, different aspects of the industry are at different points in their supply demand cycle. Fortunately overall the cycle is heading up. Display equipment sales will likely be weak in 2011, in part because tablet and smart phone displays are so much smaller than monitor and TV displays. But demand for most major types of silicon chips is headed up, as is demand for the equipment used to make crystalline silicon solar cells.
With $0.38 per share GAAP earnings in Q1 and about the same expected in Q2, it is fair to guess that fiscal 2011 earning will indeed hit at least $1.50 per share, which is AMAT's guidance.
While growth in 2011 won't be as strong as in 2010, I still see Applied's PE rising eventually to about 20. That would put it at $30 per share and still give it a 5% earnings return. As I write this you can buy the stock for just $16.36 per share. Note too that Applied has plenty of cash and pays a $0.28 annual dividend. I'd like to see that dividend raised to something more like a third of earnings, but other than that I think Applied Materials is a great company for stock holders.
See also: www.appliedmaterials.com
Trying to place a bet on tablet computers or smart phones? You can bet on the brands like Apple, Motorola, and Samsung. Or you can bet on the companies that supply the chips to make the tablets work, for instance, Qualcomm, TI, NVIDIA, Marvell and others. These are all pretty well known companies, but who really knows who consumers will be in love with in 2 years? Who knows whose chips two years from now will be winning the majority of slots in the new machines?
One thing you can pretty much count on: the constituent parts for tablet computers will be manufactured by someone. When it comes to actually making the silicon, Applied Materials is the dominant supplier of the necessary equipment.
In 2008 and 2009 Applied Materials had a rough time. No new capacity was needed; even shrinks (to smaller transistor sizes) were put off as long as possible. But because the company was well managed and had plenty of cash, it navigated successfully through the recession.
In 2010 Applied came roaring back as fabrication companies started making up for lost time.
Are people going to be satisfied with the computational or memory powers of 2010 style tablets and smart phones? No. The ARM processors are (so far) no match for the silicon from AMD or Intel that is available in a desktop or notebook computer. People may want portability, but they still want highly capable, fast machines. That means cramming more transistors onto chips, and using new technologies that keep voltage and power requirements down. In turn, to achieve that, the fabs need new machines capable of imprinting silicon with ever smaller patterns.
As reported in the Applied Materials February 24, 2011 analyst conference call, different aspects of the industry are at different points in their supply demand cycle. Fortunately overall the cycle is heading up. Display equipment sales will likely be weak in 2011, in part because tablet and smart phone displays are so much smaller than monitor and TV displays. But demand for most major types of silicon chips is headed up, as is demand for the equipment used to make crystalline silicon solar cells.
With $0.38 per share GAAP earnings in Q1 and about the same expected in Q2, it is fair to guess that fiscal 2011 earning will indeed hit at least $1.50 per share, which is AMAT's guidance.
While growth in 2011 won't be as strong as in 2010, I still see Applied's PE rising eventually to about 20. That would put it at $30 per share and still give it a 5% earnings return. As I write this you can buy the stock for just $16.36 per share. Note too that Applied has plenty of cash and pays a $0.28 annual dividend. I'd like to see that dividend raised to something more like a third of earnings, but other than that I think Applied Materials is a great company for stock holders.
See also: www.appliedmaterials.com
Labels:
amat,
Apple,
applied materials,
capital equipment,
intel,
nvidia,
Qualcomm,
semiconductors,
solar cells,
tablet computers
Monday, August 23, 2010
Applied Materials Q3 2010 Guidance
On August 18th Applied Materials (AMAT) released Q2 results and held the analyst conference call for the quarter. For those trying to see where the electronics industry is heading, it was an important call.
Consumers choosing new computers, smartphones, and big screen displays recognize a limited number of brand name device makers like Apple, HP, Sony, Dell, Nokia, etc. Each of their devices is engineered from a number of components including the casings, displays, and electronic parts. A wide variety of semiconductor parts makers like Intel, AMD, Broadcom, Qualcomm, Marvell, TI, etc., compete to be chosen by the device maker; those are the design wins that point to whether a semiconductor company will grow or fade.
The semiconductor chips themselves are made with specialty capital equipment that must lay down the microscopic circuits that make the magic happen. Every few years the size of the circuit elements decreases, so fabs (after fabrication factories) must buy new capital equipment to provide for cutting edge chip production. A number of steps and hence machines are involved in the process for creating silicon wafers, cleaning, making masks, infusing them with dopants, adding insulators, etching, etc., and testing. As you may have heard lately from, for instance, NVIDIA, when new machines start to come online it often takes time to get them working well enough that the number of defects decreases to the point that most of the chips work when tested.
Applied Materials makes equipment to make semiconductor chips, solar panels, and LCD display panels. 2009 was a dry year. With end consumer (including industrial consumers) demand down for electronic devices, the fabs had plenty of capacity. Orders to AMAT consisted mainly of a few forward-looking fabs that knew that they had to keep shrinking transistors to serve their clients with the most advanced technological needs.
2010, on the other hand, has seen enough return of demand to restart the cycle for Applied. A lot of older production technology was taken off line in 2009. Now most fabs need not just new technology but capacity expansion as well.
Applied Materials has competition in each of its lines, some more so than others. With revenues of $2.52 billion in Q2 2010, up 10% sequentially from $2.30 billion and up 123% from $1.13 billion in Q2 2009, you can see the difference a year makes.
However, management is predicting that Q3 revenue will be flattish to up 5% over Q2. The main semiconductor equipment business is expected to be about flat. Services revenue looks up 10%. LCD display equipment revenue could be up 20%. But there will likely be a 10% to 20% drop in crystalline solar revenues. In addition the thin-film solar (SunFab) business is being reorganized because few governments, banks and companies wanted to take the risk of creating the very-large scale plants required for efficient thin-film operations.
Because fabs are scrambling to deal with current demand levels, a mild softening in the world economy would not cause them to put off plans to buy new equipment. In fact, it could take another year just to catch up. If, like me, you believe a gradual re-acceleration in the global economy is the most likely scenario, then this up cycle for Applied and other semiconductor equipment manufacturers is still in its opening phase.
If non-GAAP comes in at the middle of the guidance range, $0.30 per share, that would annualize to $1.20. At today's closing price of $10.99 per share, investors will be getting earnings of 10.9% per share. That sure beats the returns on bonds and CDs.
See also my notes on Applied Materials Q2 2010 analyst call;
Applied Materials site
Consumers choosing new computers, smartphones, and big screen displays recognize a limited number of brand name device makers like Apple, HP, Sony, Dell, Nokia, etc. Each of their devices is engineered from a number of components including the casings, displays, and electronic parts. A wide variety of semiconductor parts makers like Intel, AMD, Broadcom, Qualcomm, Marvell, TI, etc., compete to be chosen by the device maker; those are the design wins that point to whether a semiconductor company will grow or fade.
The semiconductor chips themselves are made with specialty capital equipment that must lay down the microscopic circuits that make the magic happen. Every few years the size of the circuit elements decreases, so fabs (after fabrication factories) must buy new capital equipment to provide for cutting edge chip production. A number of steps and hence machines are involved in the process for creating silicon wafers, cleaning, making masks, infusing them with dopants, adding insulators, etching, etc., and testing. As you may have heard lately from, for instance, NVIDIA, when new machines start to come online it often takes time to get them working well enough that the number of defects decreases to the point that most of the chips work when tested.
Applied Materials makes equipment to make semiconductor chips, solar panels, and LCD display panels. 2009 was a dry year. With end consumer (including industrial consumers) demand down for electronic devices, the fabs had plenty of capacity. Orders to AMAT consisted mainly of a few forward-looking fabs that knew that they had to keep shrinking transistors to serve their clients with the most advanced technological needs.
2010, on the other hand, has seen enough return of demand to restart the cycle for Applied. A lot of older production technology was taken off line in 2009. Now most fabs need not just new technology but capacity expansion as well.
Applied Materials has competition in each of its lines, some more so than others. With revenues of $2.52 billion in Q2 2010, up 10% sequentially from $2.30 billion and up 123% from $1.13 billion in Q2 2009, you can see the difference a year makes.
However, management is predicting that Q3 revenue will be flattish to up 5% over Q2. The main semiconductor equipment business is expected to be about flat. Services revenue looks up 10%. LCD display equipment revenue could be up 20%. But there will likely be a 10% to 20% drop in crystalline solar revenues. In addition the thin-film solar (SunFab) business is being reorganized because few governments, banks and companies wanted to take the risk of creating the very-large scale plants required for efficient thin-film operations.
Because fabs are scrambling to deal with current demand levels, a mild softening in the world economy would not cause them to put off plans to buy new equipment. In fact, it could take another year just to catch up. If, like me, you believe a gradual re-acceleration in the global economy is the most likely scenario, then this up cycle for Applied and other semiconductor equipment manufacturers is still in its opening phase.
If non-GAAP comes in at the middle of the guidance range, $0.30 per share, that would annualize to $1.20. At today's closing price of $10.99 per share, investors will be getting earnings of 10.9% per share. That sure beats the returns on bonds and CDs.
See also my notes on Applied Materials Q2 2010 analyst call;
Applied Materials site
Labels:
amat,
applied materials,
capital equipment,
displays,
revenues,
semiconductors,
solar cells
Wednesday, May 13, 2009
Applied Materials Segment Performance Varies
Applied Materials (AMAT) is on the ropes. Fortunately it has large cash reserves. It is still paying a dividend (about 2% at this stock price). And it should bounce back when (or if) the global economy starts to recover.
The main take away for me from the AMAT analyst conference on May 12, 2009 was that there is a great deal of variance between the four major segments that make up the company. Let's take a look.
Traditionally Applied Materials makes the machines that make semiconductor chips. Broadly, the chips can be further divided into memory chips and logic IC's, although of course many systems now integrate both on a single chip. AMAT calls this it Silicon Segment. It had $260 million in revenue in the quarter. A year ago, the Silicon Segment had $1.27 billion in orders.
There is the cyclical problem with being a capital equipment manufacturer for you in a nutshell. Demand for end products like cell phones and computers is down. So demand for the chips that make them work is down. The chip manufacturing companies have plenty of capacity right now. Even as demand ramps up (if it does), they can go a bit before adding new capacity.
What silicon semiconductor equipment that was sold did not really go to increase unit capacity. A few companies are continuing to forge ahead on their technology roadmaps during the downturn. This means, in this industry, smaller process technologies. Applied Materials is selling the next generation of machines that can produce chips with smaller gates.
New orders in the Silicon Segment were $259 million. You can't tell exactly what the next quarter's revenues will be from new orders. The lag for this type of equipment is typically more than a quarter. Applied Materials had a backlog of $3.16 billion in orders at the end of the quarter (including all segments), so it could run for some time just filling older orders.
The global services segment is more steady. It had $319 million in revenue and $236 million in new orders, compared to $599 million in revenues year-earlier. That is still quite a drop off. Equipment needs to be maintained, but with utilization low the need for services drops off too.
The best news was in the environmental technology segment, which I prefer to refer to as Solar. Again, AMAT does not make solar cells, it makes the equipment to make solar cells. These are of two major types, crystalline silicon and thin-film. A year ago this quarter, revenues in solar were only $85 million. This quarter the revenue came in at $357 million, though new orders were only $141 million. Demand was very high a year ago - you remember the energy price bubble? - and now while there is plenty of long-term demand, new factories of any kind are considered a risky business.
The fourth segment is Display, which you can think of as equipment to make flat LCD screens for TVs. Results here were dismal: $84 million in sales and $13 million in new orders. Year-earlier revenues were $198 million. Again, a lot of capacity was built in 2007 and 2008, then demand slumped in the fall of 2008. Applied Materials management believes that flat-screen tvs continue to win market share, so some time in late 2009 manufacturers will have to start increasing capacity again for the presumed sunnier days of 2010.
The silicon segment is expected to recover gradually as demand re-ramps and older process technologies are scrapped for newer ones. Solar will ramp again as soon as energy prices go back up and financing becomes more generally available. Services will ramp as utilization of current equipment increases.
Of course, all of these trends assume that the economy will improve in the second half of 2009 and show something like sustained growth in 2010. In the meantime, if you own some AMAT stock (I do), sit back and enjoy your dividends. Applied Materials has $3.1 billion in cash and equivalents in the bank, and even in this dismal quarter was better than break even on cash flow (but non-GAAP net loss was $136 million, and GAAP net loss was $255 million). Some day demand for semiconductor equipment will return, and with its new solar business on top of that, Applied Materials will be even more impressive than it was back in 2007.
The main take away for me from the AMAT analyst conference on May 12, 2009 was that there is a great deal of variance between the four major segments that make up the company. Let's take a look.
Traditionally Applied Materials makes the machines that make semiconductor chips. Broadly, the chips can be further divided into memory chips and logic IC's, although of course many systems now integrate both on a single chip. AMAT calls this it Silicon Segment. It had $260 million in revenue in the quarter. A year ago, the Silicon Segment had $1.27 billion in orders.
There is the cyclical problem with being a capital equipment manufacturer for you in a nutshell. Demand for end products like cell phones and computers is down. So demand for the chips that make them work is down. The chip manufacturing companies have plenty of capacity right now. Even as demand ramps up (if it does), they can go a bit before adding new capacity.
What silicon semiconductor equipment that was sold did not really go to increase unit capacity. A few companies are continuing to forge ahead on their technology roadmaps during the downturn. This means, in this industry, smaller process technologies. Applied Materials is selling the next generation of machines that can produce chips with smaller gates.
New orders in the Silicon Segment were $259 million. You can't tell exactly what the next quarter's revenues will be from new orders. The lag for this type of equipment is typically more than a quarter. Applied Materials had a backlog of $3.16 billion in orders at the end of the quarter (including all segments), so it could run for some time just filling older orders.
The global services segment is more steady. It had $319 million in revenue and $236 million in new orders, compared to $599 million in revenues year-earlier. That is still quite a drop off. Equipment needs to be maintained, but with utilization low the need for services drops off too.
The best news was in the environmental technology segment, which I prefer to refer to as Solar. Again, AMAT does not make solar cells, it makes the equipment to make solar cells. These are of two major types, crystalline silicon and thin-film. A year ago this quarter, revenues in solar were only $85 million. This quarter the revenue came in at $357 million, though new orders were only $141 million. Demand was very high a year ago - you remember the energy price bubble? - and now while there is plenty of long-term demand, new factories of any kind are considered a risky business.
The fourth segment is Display, which you can think of as equipment to make flat LCD screens for TVs. Results here were dismal: $84 million in sales and $13 million in new orders. Year-earlier revenues were $198 million. Again, a lot of capacity was built in 2007 and 2008, then demand slumped in the fall of 2008. Applied Materials management believes that flat-screen tvs continue to win market share, so some time in late 2009 manufacturers will have to start increasing capacity again for the presumed sunnier days of 2010.
The silicon segment is expected to recover gradually as demand re-ramps and older process technologies are scrapped for newer ones. Solar will ramp again as soon as energy prices go back up and financing becomes more generally available. Services will ramp as utilization of current equipment increases.
Of course, all of these trends assume that the economy will improve in the second half of 2009 and show something like sustained growth in 2010. In the meantime, if you own some AMAT stock (I do), sit back and enjoy your dividends. Applied Materials has $3.1 billion in cash and equivalents in the bank, and even in this dismal quarter was better than break even on cash flow (but non-GAAP net loss was $136 million, and GAAP net loss was $255 million). Some day demand for semiconductor equipment will return, and with its new solar business on top of that, Applied Materials will be even more impressive than it was back in 2007.
Wednesday, March 5, 2008
Applied Materials (AMAT) Solar Play
Applied Materials (AMAT) disclosed a deal to sell $1.9 billion in solar cell manufacturing equipment to a non-U.S., privately held, unnamed corporation on Tuesday [See the AMAT SEC filing]. Applied SunFab thin film tandem junction production equipment and installation/warranty services will be used to construct multiple solar factories.
This comes a few weeks after Applied Material's fiscal Q1 2008 analyst conference of February 12 [See my summary of that.]. Overall Q1 was a poor quarter as semiconductor manufacturers, AMAT's customers, were cautious about investing in new equipment in the face of questionable demand going forward.
The bright spot was the solar energy segment (Energy and Environmental Solutions) which is a relatively new market for Applied Materials. Revenues in the quarter were $122 million, but new orders in the quarter were $260 million.
Management said it was in discussion with 4 major potential purchasers wanting to build solar cell fabrication factories. This $1.9 billion order must be one of those four.
Given that the annual revenue run rate has descended to approximately $8 billion per year, this is a big boost. But what is great is that Applied Materials, even at the low run rate, managed $262 million in net income in the quarter. So its way in the black even in a down cycle.
Applied Materials also has a fair amount of cash, $3.4 billion at the end of the quarter. This despite several fairly recent acquisitions for the solar segment.
I would like to buy Applied Materials, which seemed undervalued to me when I last wrote about it back in November [See Applied Materials Valuation]. On the other hand I have limited cash for investment, and other stocks I would like in my portfolio are also under priced due to the current liquidity crunch.
Even given all this, Applied Materials is a somewhat risky investment due to the uncertain future of the semiconductor manufacturing industry.
Keep diversified.
More data:
www.appliedmaterials.com
My Applied Materials main page.
This comes a few weeks after Applied Material's fiscal Q1 2008 analyst conference of February 12 [See my summary of that.]. Overall Q1 was a poor quarter as semiconductor manufacturers, AMAT's customers, were cautious about investing in new equipment in the face of questionable demand going forward.
The bright spot was the solar energy segment (Energy and Environmental Solutions) which is a relatively new market for Applied Materials. Revenues in the quarter were $122 million, but new orders in the quarter were $260 million.
Management said it was in discussion with 4 major potential purchasers wanting to build solar cell fabrication factories. This $1.9 billion order must be one of those four.
Given that the annual revenue run rate has descended to approximately $8 billion per year, this is a big boost. But what is great is that Applied Materials, even at the low run rate, managed $262 million in net income in the quarter. So its way in the black even in a down cycle.
Applied Materials also has a fair amount of cash, $3.4 billion at the end of the quarter. This despite several fairly recent acquisitions for the solar segment.
I would like to buy Applied Materials, which seemed undervalued to me when I last wrote about it back in November [See Applied Materials Valuation]. On the other hand I have limited cash for investment, and other stocks I would like in my portfolio are also under priced due to the current liquidity crunch.
Even given all this, Applied Materials is a somewhat risky investment due to the uncertain future of the semiconductor manufacturing industry.
Keep diversified.
More data:
www.appliedmaterials.com
My Applied Materials main page.
Labels:
amat,
applied materials,
semiconductors,
solar cells,
solar technology,
SunFab
Subscribe to:
Posts (Atom)
